For support on any of our products please refer to the below postings or search for your item using our online search. If you are unable to find what you are looking for please contact us for friendly advice and solutions.
Håkan Lovallius and I have bought one of your Baxter cd.copier.
Installation went fine, but it failes burn any kind of CD/DVD.
It stops on leads-in or just plain error.
Dear Mikael, pls confirm the brand of media you are using. Kind regards.
Customer - 2006-06-29 16:50:28
I have tried to burn with
Fujifilm DVD+RW
traxdata DVD+RW
and a few noname brands
I have also tried to get an image from a bought dvd and a music CD and that failed to.(plain error message)
Another problem is that the arm stops for a moment at the right position but moves on and drops the disk outside the place it is supose to.
Any thoughts on this.
Thank you
Best Regards
Mikael
Nic - 2006-06-30 09:51:27
Dear Mikael - A shop bought DVD will never work due to copyright protection. Please try to copy a CD onto a CDR. Kind regards.
David - 2006-09-06 14:46:44
Hi Mikael - When the arm moves and drops the disc outisde the machine, it indicates the disc has failed. The machine will seperate all burnt discs into a "successful" and "unsuccessful" bin. Does the machine you are using have USB 2.0? Kind Regards
David, CD-Writer.com
Nic - 2006-09-07 18:24:03
Dear Mikael -
Please download a UDF test image or ISO here, then test BAXTER to check recording is working ok.
Also be sure you are using USB2, an XP host and –R or +R not RW media as a test.
Customer - 2006-09-08 13:03:07
Thank you for your replay.
I have now done the following tests.
1. moved the test image(iso) through the network to the local computer and then burned the file to a CD-R disc.
status:no error
2. Put a data CD-R disc with 600 MB data in then baxter burner as a master and made a ISO file that was copied to another CD-R disc.
status: no error
3. Put a DVD-R disc as master with 4,5 GB of data in the baxter burner to make a copie to another DVD-R disc.
Status: The baxter burner took 80% of the data to the iso file then stoped because of read error ( the 80% took 90 min to rip)
So over all I can now make cd copies but not dvd copies.
What do I do now.
Thanks for your helm
BR
Mikael
All StorDigital products can be purchased online at www.cd-writer.com. CD-writer.com Ltd is a UK based company offering a huge selection of CD and DVD production systems, including DVD CD Printers, DVD Copiers, DVD CD duplicators, DVD and CD publishers, blank DVDs, recordable CDs, lightscribe and accessories.
